Robotic ICSI is here: what automated sperm injection means for Indian IVF labs
Published 28 October 2026 · IVF Automation · Lab automation and AI
In 2025, a baby was born after ICSI performed by a machine, supervised by an operator about 3,700 km away. Intracytoplasmic sperm injection (ICSI) is among the most skill-dependent steps in the embryology lab, and for three decades it has been done by hand. Robotic and AI-assisted ICSI is now moving from engineering papers into small clinical studies. Here is what has actually been published, what these systems do, and what Indian lab managers should watch before anyone tries to sell them one.
Why ICSI is a target for automation
ICSI asks one person to choose a single sperm, immobilise it, load it into a microneedle, hold an oocyte steady and inject it, again and again, often late in a long day. As the authors of the first robotic ICSI paper put it in 2011, results "vary significantly among clinics due to poor reproducibility and inconsistency across operators."
The Vienna consensus (ESHRE and Alpha Scientists, 2017) already treats ICSI as something to measure. It sets two lab indicators for it:
- ICSI damage rate: competency 10% or less, benchmark 5% or less.
- ICSI normal fertilisation rate: competency at least 65%, benchmark at least 80%.
Automation developers use exactly these indicators as their yardstick, which makes them the right lens for judging any claim you hear.
The research timeline, in four steps
1. 2011: the first robotic ICSI system (Toronto)
Lu, Sun and colleagues reported the first robotic ICSI system in IEEE Transactions on Biomedical Engineering. It combined a cell-holding device, motion control and computer vision to track a single sperm, immobilise it, aspirate it and inject it, needing "only a few computer mouse clicks". The trials used human sperm with hamster oocytes, not human eggs: 90.0% injection success and 90.7% survival across 120 oocytes.
2. 2022: ICSI-A tested on human donor oocytes
A team including Overture Life researchers presented the ICSI-A robot at ASRM (abstract in Fertility and Sterility). AI was trained to recognise oocyte structures such as the zona pellucida and polar body. In a small clinical validation using donor oocytes, 13 of 14 robot-injected oocytes fertilised, against 16 of 18 injected manually. Notably, the robot was run by an engineer with no micromanipulation experience. The authors called the results preliminary.
3. 2025: first live birth from digitally controlled, remote ICSI
The milestone case report appeared in Reproductive BioMedicine Online. Conceivable Life Sciences (New York and Guadalajara) built a workstation that automates all 23 micromanipulation steps of ICSI, using computer vision, AI-based sperm selection, a laser for sperm immobilisation and piezo pulses to penetrate the oolemma. The work ran at Hope IVF Mexico as a pilot study.
The facts worth knowing, as reported:
- Five donor oocytes were injected with the system and three manually as controls. Four of five fertilised with the automated system, and three of three manually.
- Across 115 steps, the system completed about half on its own; the remote operator controlled the other 57 (49.6%) digitally.
- Each automated injection took an average of 9 minutes 56 seconds. On-site staff were still needed for set-up and once for troubleshooting.
The authors are clear that "improvements in autonomy and efficiency are needed". This is a feasibility case report, not proof that robots beat embryologists.
4. 2025: pre-clinical validation of the full AI routine
A follow-up Fertility and Sterility abstract described a fully automated system built from off-the-shelf parts (an inverted microscope, a Hamilton Thorne laser, an Eppendorf piezo unit, motorised stage and cameras) under in-house AI control. It was tested with human donor sperm and rabbit oocytes across 59 injections, against pre-set acceptance criteria for each step.
The nearer-term tool: AI sperm selection during manual ICSI
Full robots are still in pilots. A smaller step is already being studied in routine labs: software that watches the ICSI dish and scores each sperm while the embryologist still does the injection.
The best-documented example is SiD (Sperm Identification, IVF 2.0 Ltd), which scores individual sperm in real time as Low, Medium, Good or Best from motility measures such as straight-line velocity, linearity and head movement pattern.
- A sibling-oocyte study from IVI Valencia (80 ICSI cycles, 685 mature oocytes) found lab outcomes comparable to selection by senior embryologists, with non-significant differences. The authors pointed to time savings and support for training junior embryologists.
- A 2024 ESHRE abstract on 608 sibling oocytes likewise found SiD "as proficient as highly experienced embryologists", with no significant difference in fertilisation rate.
For an Indian lab, that framing matters: these tools are presented as a consistency and training aid, not a replacement for the embryologist's judgement.
What this means for Indian IVF labs today
Nothing to buy yet, but plenty to prepare. We found no regulator clearance for an autonomous ICSI robot in published sources so far; the work above is pilot and pre-clinical. If a vendor offers one, ask for its regulatory status in India, which is overseen by CDSCO for medical devices, and in its home market. Our guide to FDA and CDSCO clearance for AI embryo tools covers the questions to ask.
Practical steps that pay off whether or not you ever automate ICSI:
- Measure ICSI per operator now. Track damage and normal fertilisation rates for each embryologist against the Vienna values. Any future tool, AI or robotic, can only be judged against your own baseline. Our free KPI calculator and KPI dashboard guide help here.
- Digitise the ICSI record. Automated systems log every step. Labs whose ICSI data already sits in a LIMS, with operator, time and dish ID, will integrate faster. The ART Act checklist covers record-keeping duties under the ART (Regulation) Act, 2021.
- Keep witnessing in the loop. Any new device at the ICSI station must fit your sample identification and witnessing process, not bypass it.
- Ask evidence questions, not marketing ones. How many human oocytes has the system injected? Who operated it? How many steps needed human help? Was there a sibling-oocyte or randomised comparison? What is the time per oocyte?
- Plan for skills, not just hardware. Remote supervision could one day let one senior embryologist support several sites. That is a workforce and training question as much as a technology one.
The bottom line
Robotic ICSI has gone from hamster oocytes in 2011 to a first live birth in 2025, but the published human data is still a handful of oocytes. AI sperm-selection software is closer to daily use and is being tested as an aid to embryologists. Labs that measure ICSI well today will be the ones best placed to judge these tools tomorrow.
Sources
- Lu Z, Zhang X, Leung C, Esfandiari N, Casper RF, Sun Y. Robotic ICSI (intracytoplasmic sperm injection). IEEE Trans Biomed Eng, 2011
- Costa-Borges N et al. First pre-clinical and clinical validation of an automated sperm injection robot (ICSI-A) in human oocytes. Fertility and Sterility (ASRM abstract), 2022
- A digitally controlled, remotely operated ICSI system: case report of the first live birth. Reproductive BioMedicine Online, 2025
- Hernandez EG et al. Pre-clinical validation of an AI-powered automated robotic ICSI system. Fertility and Sterility (abstract), 2025
- Carrión Sisternas L et al. Automated real-time sperm selection for ICSI: sibling oocyte evaluation. Fertility and Sterility (abstract), 2024
- P-108: Automated sperm selection software (SiD) provides similar results as human selection for ICSI. Human Reproduction (ESHRE abstract), 2024
- ESHRE Special Interest Group of Embryology and Alpha Scientists. The Vienna consensus: report of an expert meeting on the development of ART laboratory performance indicators. Human Reproduction Open, 2017
- Central Drugs Standard Control Organisation (CDSCO), Government of India
Your next step
Benchmark your ICSI numbers with our free IVF lab KPI calculator, so you have a baseline before any AI or robotic tool reaches your lab. Vendors of ICSI, micromanipulation or AI lab software can claim a free listing.
General operational information only; not medical, clinical or legal advice. Product and company names are mentioned for information and are not endorsements. See our disclaimer.